Friday, December 11, 2020

Deck the Halls...

  

 For our next science activity we are going to be making plastic Christmas Decorations!


We will be releasing this activity on the Surrey Libraries Facebook page on Thursday 17th December at 4:30pm. 

For this activity you will need:
  • Milk
  • Vinegar
  • A Jug
  • A teaspoon
  • Some Kitchen Roll
  • Food Colouring
  • A Cocktail Stick
If you have some Christmas cookie cutters you may like to use these for this activity as well


For more information watch this short information video

Follow Surrey Libraries on Facebook and Twitter for the latest information and don't forget to visit Science Club on the Surrey Libraries YouTube Channel

Bath Bombs

If you have ever used a bath bomb before you will know that when you add it to the water they start to fizz and produce lots of bubbles. The reason this happens is because two of the ingredients inside start to react together when the bath bomb goes into the water and this produces lots of bubbles of carbon dioxide.

To make our bath bombs the first thing that we are going to do is add the dry ingredients together in a bowl. So we are going to add 2 spoons of bicarbonate of soda, 1 spoon of Epsom salts and 1 spoon of citric acid and then mix them together.  

We are then going to add 2 drops of essential oils, and 2 drops of food colouring and give it a mix. This might not look like a lot of colour but it spreads and you can add more at the end if you want to. 

You are then going to add 5 drops of oil and give it a mix, and then 5 drops of water. Now you will want to be careful when you add the water as you don’t want to add too much. When you add the water you will see that there is a small reaction starting to happen where you add the water drops. This is the bicarbonate of soda reacting with the citric acid as you have an acid and an alkali in your bath bomb, and these react together. 

Make sure that you mix you bath bomb mixture well. At this point your mixture should start to look like breadcrumbs and this means that it is ready. If you need to you can add a couple more drops of food colouring and then it's time to put it into your moulds. Now you may have bath bomb moulds but don’t worry if you don’t as you could use ice cube trays or even something like a plastic yogurt pot. What you want to do is pack your bath bomb mixture inside and then you are going to leave in inside to harden for about 24hours. After that you can take it out and it will be ready to use! 

If you want an alternative to citric acid you can replace this with cream of tartar. You could even try making bath bombs once with citric acid and once with cream of tartar and compare the results! You could also try experimenting with different colours, flavours and different shaped moulds...

The video tutorial for this activity is available on the Surrey Libraries Facebook Page or the Surrey Libraries YouTube Channel

Friday, December 4, 2020

Bath Bombs away...

 For our next science activity we are going to be making bath bombs!


We will be releasing this activity on the Surrey Libraries Facebook page on Thursday 10th December at 4:30pm. 

For this activity you will need:
  • Bicarbonate of Soda
  • Citric Acid
  • Epsom Salts
  • Food Colouring
  • Essential Oil
  • Olive Oil/ Vegetable Oil
  • Water
  • A bowl (or something to mix everything in)
  • A spoon
  • A pipette (or something to measure with)
  • A mould for the bath bombs

For more information watch this short introduction video

Follow Surrey Libraries on Facebook and Twitter for the latest information and don't forget to visit Science Club on the Surrey Libraries YouTube Channel

Virus Structure

 Viruses are very small particles that can infect animals and plants and make them ill. They are made from a small amount of genetic material - either DNA or RNA (similar to DNA) and a protein shell. Viruses can come in a range of different structures but for this activity we are just going to be looking at one example.

Covid - 19 is caused by a virus, from a type of viruses called coronaviruses. The structure of these viruses are made up of a piece of RNA surrounded by a protein shell, covered by a lipid membrane, with proteins on the outside. 

To make a model of this the first thing that you need to do is take a piece of silver foil and roll it into a ball. This is going to represent the RNA centre surrounded by the protein shell.

You are then going to cover this with a layer of butter, to represent the lipid membrane. Lipids are fats. Butter is also made from fats so it will work in a similar way. We can then add some sprinkles to represent the proteins on the surface of the virus.

You are going to need 2 virus models for this activity so you will need to make a second model in the same way.

We are now going to test our models to see what happens when we wash our hands. In one bowl we are going to add some warm water and in the second bowl we are going to add warm water and some liquid soap. We are then going to add one virus model to each bowl

Give each bowl a mix and so that the virus model gets covered, just like it would do when you wash your hands and leave it in the water for a minute so that you can see what happens

After about a minute take the virus models out of the water and see what has happened... What do you see? You should see that the model that was in the bowl with soap and water had broken down more than the model that was in the bowl with just water. This shows that it is best to wash your hand with soap and water as if the virus breaks down it can't cause illness.

The video tutorial for this activity is available on the Surrey Libraries Facebook Page or the Surrey Libraries YouTube Channel

Monday, November 30, 2020

What's bugging you???

 

 For our next science activity we are going to be learning about the structure of Viruses!


We will be releasing this activity on the Surrey Libraries Facebook page on Thursday 3rd December at 4:30pm. 

For this activity you will need:
  • Silver Foil
  • Butter
  • Sprinkles
  • Warm Water
  • Liquid Soap
  • 2 Bowls (or similar containers)
  • A Butter Knife
  • A spoon
For more information watch this short introduction video.


Follow Surrey Libraries on Facebook and Twitter for the latest information and don't forget to visit Science Club on the Surrey Libraries YouTube Channel

Thursday, November 26, 2020

Make a Lava Lamp

 


The Lava Lamp is made using oil and water. Oil and water do not mix as they have different densities. Oil has a lower density than water so it will settle on top of the water. This means that the oil is lighter for its size.

To make the lava lamp the first thing that you need to do is pour some water into your plastic bottle. You will want to pour water about 2/3 of the way up the bottle


You will next want to add your oil. You can pour in the remaining 1/3 of the bottle up with oil. You should see that the oil will settle on top of the water. You can add the oil first and then add the water if you would like to. Even if you do this the oil will still settle on top of the water.


You can now add some food colouring to the bottle. You will see that the food colouring travels through the layer of oil and settles in the water layer as the food colouring has the same density as water.


The last thing that you need to do is add your alka saltza or fizzy vitamin tablet to your bottle. As soon as the tablet is added to the water a reaction starts to happen as the tablet dissolves. Bubbles of carbon dioxide are produced and these bubbles are lighter than the water and the oil so they start to travel to the top of your bottle to the air on the surface. As the bubbles of carbon dioxide travel to the surface, they take a small amount of water with it. When the carbon dioxide reaches the surface it floats away but the water becomes heavier without the carbon dioxide so it starts to sink down through the oil layer. So you are seeing bubbles rising and falling through the bottle to make your lava lamp until all of the tablet is dissolved and the reaction is complete


The video tutorial for this activity is available on the Surrey Libraries Facebook Page or the Surrey Libraries YouTube Channel

Friday, November 20, 2020

Getting Groovy...

 For our next science activity we are going to be making Lava Lamps!


We will be releasing this activity on the Surrey Libraries Facebook page on Thursday 26th November at 4:30pm. 

For this activity you will need:
  • A 500ml plastic bottle (but you can use an alternative size)
  • Water
  • Vegetable Oil/ Sunflower Oil
  • Food Colouring
  • Fizzy Tablets eg. Alka Saltza/ Fizzy Vitamins

For more information watch this short introduction video.

Follow Surrey Libraries on Facebook and Twitter for the latest information and don't forget to visit Science Club on the Surrey Libraries YouTube Channel

Paper Aircrafts

  In this activity we are going to be making a paper aeroplane, a glider and a helicopter and comparing how they fly For this activity you w...