Thursday, October 15, 2020

Flower Press

 With appropriate care pressed flowers can last for hundreds of years! There are examples of pressed flowers dating from the late 17th century in the Natural History Museum. 

The first thing that you are going to want to do is collect some flowers to press. Have a look in your garden or when you go outside but be careful not to pick too many. It's best not to choose really thick flowers like roses as these can be difficult to press, but have a look and see what you can find

Once you have found some flowers you are going to get a book and then lie some sheets of newspaper on top, and then some kitchen roll on top of this

You can then carefully arrange your flowers on top of the kitchen roll. Make sure that the flowers don't overlap and that there is space between the flowers

You can then put a layer of kitchen roll on top of the flowers followed by a layer of newspaper and then a book on top. If you can put a big pile of books on top. 

Check on the flowers every day to make sure they are OK and after about a week they should be ready. As the flowers dry the kitchen roll and newspaper absorb the moisture from the flowers and prevent it from decaying but the dried flower keeps most of the pigments that produce colour.


The video tutorial for this activity is available on the Surrey Libraries Facebook page or the Surrey Libraries YouTube Channel

Tuesday, October 13, 2020

Fabulous Flowers

 

 For our next science activity we are going to be pressing flowers!


We will be releasing this activity on the Surrey Libraries Facebook page on Thursday 15th October at 4:30pm. 

For this activity you will need:
  • Some Newspapers
  • Some Kitchen Roll
  • A Stack of Books
  • Flowers
For more information view this short introduction video.



Follow Surrey Libraries on Facebook and Twitter for the latest information and don't forget to visit Science Club on the Surrey Libraries YouTube Channel

Thursday, October 8, 2020

Make a Model Solar System


There are 8 planets in the Solar system. These are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus and Neptune. A Mnemonic to remember their order is - My Very Educated Mother Just Served Us Noodles. 

The first thing that you are going to need to do is colour in the planets from the Worksheet found on the Shining Mom blog. 
We are now going to cut 8 strips from the piece of black card. You want to try and make the strips about the same thickness if you can.

You first need to cut out the Sun and starting with the planet furthest away from the Sun - and that is Neptune so we will cut it out and glue it to one of the strips of card


We are then going to push a split pin through the centre of the Sun and through the end of the strip of back card that is attached to Neptune


You now want to cut out the 7th planet from the Sun - Unanus. You are going to stick this to a strip of black card and then cut a small amount off the end of the strip as it is nearer to the sun than Neptune. You can then push the end through the split pin in the centre of the Sun


You are going to need to repeat this step for the other planets moving in towards the sun from Saturn to Mercury, each time you will need to gradually shorten your strip of black card as the planet moves closer to the Sun


You can now close your split pin and move your planets around the Sun at the centre!

The video tutorial for this activity is available on the Surrey Libraries Facebook Page or the Surrey Libraries YouTube Channel

Wednesday, October 7, 2020

Explore the Planets...


For our next science activity we are going to be making a moving model of the solar system!

We will be releasing this activity on the Surrey Libraries Facebook page on Thursday 8th October at 4.30pm. 

For this activity you will need:
  • An A4 piece of Black card
  • A pair of scissors
  • A glue stick
  • A split pin
  • Some colouring pens/ pencils and crayons
You will also need to print this template which can be found on the Shining Mom blog onto white card.



For more information watch the short introduction video.

Follow Surrey Libraries on Facebook and Twitter for the latest information and don't forget to visit Science Club on the Surrey Libraries YouTube Channel

Thursday, October 1, 2020

Make a Pinball Machine


 In a Pinball Machine there are 3 different forces acting on the ball inside. The pinball machine is kept at an angle so gravity causes the ball to roll downwards towards the flippers. When the ball hits the flippers, or any of the obstacles in the pinball machine, contact force will cause the ball to change direction and then the third force that is acting on the ball is friction. The friction between the ball and the cardboard box causes the ball to roll rather than slide across the surface.

The first thing that we are going to do is make the flippers for your pinball machine. To do this we are going to cut a small slit out of each side of the show box. We are then going to cut a rectangle of card from some thick corrugated cardboard. You should be able to get this from some packaging. You want to make sure that the corrugations are facing downwards along the long side of the rectangle. We are then going to use a cocktail stick and push the cocktail stick through the corrugation and then into the slit in the side of the shoebox. You can then tape it in place

You should be able to move these cardboard flippers twisting on the cocktail stick. The next thing that you are going to do is start to design the obstacles inside the pinball machine. To do this you may like to use a range of different things. You may want to play around with different designs. You can use the milk bottle tops, straws, lolly sticks and card to make some obstacles inside your pinball machine. You can also use your colouring pens/ pencils/ crayons to decorate your pinball machine.


You are now ready to drop in your marble and test your pinball machine. I hope that you have fun!

The video tutorial for this activity is available on the Surrey Libraries Facebook Page or the Surrey Libraries YouTube Channel

Friday, September 25, 2020

Off to the Arcade

 For our next science activity we are going to be making a pinball machine!


We will be releasing this activity on the Surrey Libraries Facebook page on Thursday 1st October at 4.30pm. 

For this activity you will need:
  • A shoe box
  • A pair of scissors
  • Tape
  • Cocktail Sticks
  • Corrugated Card (from cardboard packaging)
  • A Marble
You may also like to collect the following to decorate your pinball machine:
  • Milk Bottle Tops
  • Straws
  • Lolly Sticks
  • Colouring Pens/ Pencils/ Crayons


For more information watch our short introduction video.

Follow Surrey Libraries on Facebook and Twitter for the latest information and don't forget to visit Science Club on the Surrey Libraries YouTube Channel

Thursday, September 24, 2020

Newspaper Structures

 


Newspaper may not appear to be very strong, and individual sheets of newspaper can tear quite easily, but if you take many sheets of newspaper or even a whole newspaper and try and tear it you will find it a lot stronger.

If you roll up multiple sheets of newspaper into a tube and tape this together you have a strong shape which you can use as the base for building your newspaper structure

There are lots of different structures that you may like to try and build with your newspapers, you may want to try and build a tall tower. You may like to attempt to build a table or a chair or something similar and see if it can hold the weight of a book without collapsing. Or you may have your own idea of what you would like to build.

Remember when you are building your newspaper structure to think about what shapes you are using. You will want to use strong shapes to make your structure strong and ensure it doesn’t collapse or fall over. 

The video tutorial for this activity can be found on the Surrey Libraries Facebook Page or the Surrey Libraries YouTube Channel

Paper Aircrafts

  In this activity we are going to be making a paper aeroplane, a glider and a helicopter and comparing how they fly For this activity you w...